Now that it’s possible to write custom firmware for a Walkera Hoten-X RX2635H-D receiver it’s time to try to access the various components on the ATMEL XMEGA32A4 based receiver board. First thing was to blink a LED which was quite simple. But for easier development there must first be a more user friendly way interact with the board. Fortunately there is a serial port available. It is normally used to upload new firmware and as additional channel for controlling e.g. a camera in the original Walkera firmware.
[Read more…]
Based on the findings of previous posts I wrote a simple program using ATMEL’s AVR Studio and flashed it onto the Walkera Hoten-X RX2635H receiver. It’s very simple. Its the classic “hello world” program. As the receiver has only one LED to communicate with the outside world I used this LED as user interface. The program uses morse code to send the text “OK” by pulsing the LED. This results in the pulses - - - (long long long) - . - (long short long) for the characters O and K.
[Read more…]
After playing around with analyzing how the firmware update process for a Walkera Hoten-X receiver (RX2635H) works and how this firmware is secured with a simple encryption method it’s now time to analyze the receiver hardware. So that it meight be possible to develop a custom firmware for this receiver.
[Read more…]
Wednesday, March 25, 2015
Walkera produces realy fine and popular quadcopters. They are targeted to people who want to have fun flying. Just buy one of these RTF (ready to fly, no assembly or soldering required) models and start. That’s perfectly OK. But for me I always want to know whats going on inside a device. Especially a quadcopter. I own a few models and also some Walkera ones. A Hoten-X and a Ladybird. After analyzing the firmware update process of the Walkera Devo-7 transmitter and the Hoten-X (RX2635H) and Ladybird (RX2634H) receivers in another post, I now analyzed the receiver and its firmware.
[Read more…]
Tuesday, December 30, 2014
The Walkera X-Z-18 camera is a very cheap and simple flight recording camera. It is intended for usage with Walkera’s Hoten-X or Ladybird quadcopters but it can also be used with other copters.
See this post for how to install and use it.
I’m always interested in how thing’s work so the following post describes some internals of the X-Z-18 camera.
Click on a picture for a larger view
[Read more…]
rss
atom